測量1噸燃氣鍋爐的蒸汽濕度

With chloride method of saturated steam condensation water and chlorine root Cl - pan of water ratio of the percentage of saturated steam humidity, its computation, such as: saturated steam humidity chlorine root omega = saturated steam condensation water chlorine root (mg/kg) pan of water (mg/kg) x 100% (1) the pan of water conductivity and steam condensation water conductivity measurement steps are the same, when measuring water conductivity should be pay attention to the following:

用氯根法精確測量1噸天燃氣蒸汽鍋爐飽合水飽和液體加熱加熱空氣冷卻劑水和鍋水氯根Cl-分量之比的百評分為飽合水飽和液體加熱加熱溫溫度，其算起如式： 飽合水飽和液體加熱加熱溫溫度ω= 飽合水飽和液體加熱加熱空氣冷卻劑水氯根分量(mg/kg) 鍋水氯根分量(mg/kg)×100%(1) 鍋水純水純水導電率與水飽和液體加熱加熱空氣冷卻劑水純水純水導電率的精確側量方法步驟想同，在精確側量鍋水純水純水導電率時候需要需注意以內些：

(1) when the water is cloudy, the filter should be filtered. When the concentration of the chloride ion is high, it is diluted and measured.

(1)如鍋水相對變渾時，須要篩選棉確定篩選;鍋水氯鋁離子滲透壓高時做好稀釋工作后檢測法。

(2) when the concentration of chloride ions in the steam condensate is low, the sampling quantity of one or more times is measured.

(2)水蒸汽氣液分離器一般的水都氯鋁離子質量濃度較低時，提升兩倍或多倍的制樣量，對其進行旋光度的測定。

With conductivity meter respectively measured the percentage of steam condensed water and the ratio of boiler water conductivity of saturated steam humidity, its computation, such as: saturated steam humidity omega = saturated steam condensation water conductivity (mu s/cm) pan of water conductivity (mu s/cm) x 100% (2) when measuring need to pay attention to the following:

耗純水導電率儀分別測定蒸氣冷疑水和鍋水純水導電率之比的百積分為是處于飽合狀態蒸氣對環境環境濕度的，其求算如式： 是處于飽合狀態蒸氣對環境環境濕度的ω= 是處于飽合狀態蒸氣冷疑水純水導電率(μs/cm) 鍋水純水導電率(μs/cm) ×100% (2) 在估測時要要注意之下什么時候：

(1) the solution conductivity is associated with temperature, so the steam condensed water and boiler water shall be measured after cooling to the same temperature, such as temperature is different, use with temperature compensation measure conductivity apparatus;

(1)是由于溶劑水的純水電導率與環境氣溫管于，以至于水蒸汽冷疑水和鍋水應急冷到某個環境氣溫后使用校正，如環境氣溫多種，則需施用帶環境氣溫補上的水的純水電導率儀使用校正;

(2) when measuring steam condensation water and boiler water conductivity by an electric conductivity instrument, the electrode should be cleaned in time to prevent cross contamination.