整理2噸蒸氣工業鍋爐燃燒的余熱環保再生資源回收相關問題的策略
Process 2 tons steam boiler heat recovery method
2噸水蒸汽電爐中的余熱根據于水水蒸氣工業鍋爐燃燒的排放全過程，平常的回收公司方試是用的排放澎脹器自身排放水，第二開展擴盤減壓方法，十分迅速組成兩次水蒸氣，第二再生利用兩次水蒸氣所產生的糖份開展加溫熱水的工作任務。
In the steam boiler blowdown process of waste heat from the steam boiler, the general way of recycling is domestic sewage is collected by a drainage expander and then super-popular decompression, rapid formation of secondary steam, and then use the heat generated by the secondary steam for heating water.
是這款回收并形式會出現幾個故障 。第二種，從而排盡液體加熱爐的排水水已經隨身攜帶有個量能量場，得不著合理的的應用：第二種，天燃氣液體加熱爐丙烷燃燒的強度差，起壓力，必須要 冷凝水水熱度有點兒高一絲，供水系統泵則會引起氣化，不嫩順利工作上;第3，為能維持順利的產量，必須要 投入廣泛的飲水和生物燃料。
But there are three problems with this recycling approach. First, eventually exhaust steam boiler sewage still carries a lot of energy, not the use of reasonable: second, gas steam boiler combustion intensity difference, differential pressure, as long as the condensate a slightly higher temperature, feed water pump will generate vaporization, not the normal work of the tender; Third, to maintain normal production, it takes a lot of running water and fuel.
為應對傳統的液體鍋爐風機的再利用辦法，可選擇一些三種辦法。一是種，從新鮮的氣氛發動機打火器左右兩手。適用以超冷卻性管主要冷卻部件的新鮮的氣氛發動機打火器，板換速度會達98%不低于，比平民熱互換器高是眾多。這個新鮮的氣氛發動機打火器設施設計方案纖巧，拆遷賠償適用面積小，就有平民熱互換器的四分之四。一同還會有效性不要氣體對板換器的酸露點腐化，不斷提高該系統的運行質保期。
In order to solve the traditional steam boiler recycling method, the following two ways can be adopted. The first is from the air preheater. Using superconducting heat pipe as the main heat transfer element, the heat transfer efficiency can be more than 98%, which is much higher than the ordinary heat exchanger. The air preheater is exquisitely designed, with a small footprint and only a third of the usual heat exchanger. At the same time, it can also effectively prevent the acid dew-point corrosion of the heat exchanger and improve the life of the equipment.
其倆種，從相混水的收購并采取機入手。通過采取抽真空、供壓的較溫度度相混水的收購并采取機，可會將一臺分熱焓挺高的閃蒸和較溫度度疑固水，所采用較溫度度碳酸飲料相混的收購并采取會的收購并采取壓入工業煤氣鍋爐達成產汽——用汽——再產汽的閉路循環設計設計然后上升了蒸氣可行熱采取率。也較低了能量補充、鹽能的浪費，較低了工業煤氣鍋爐負荷量，開源節流了非常多的軟水。
The second is from a hybrid water recovery device. To seal, pressure of high temperature mixed water recycling equipment, can be directly to the part of the flash with high enthalpy and the high temperature condensate, mixed with high-temperature soda directly recycling formation pressure into the boiler to produce steam, steam, to produce steam closed-circuit circulation system and improve the effective utilization rate of hot steam. It also reduces the consumption of electricity and salt, reduces the load of the boiler and saves a lot of soft water.
