That is, boiler capacity or boiler output, in general, should be close to the maximum amount of steam used in production or life, or with heat. The maximum amount of steam or heat used in life is generally about 80% of the boiler's rated evaporation, which is the most suitable. However, there are many factors that will affect the boiler operating conditions, such as pipe loss, boiler scale and so on.
也那就是
4噸燃料加熱爐使用量或燃氣工業熱水蒸汽鍋爐效率，般來說總結應介于分娩或性生活最多用汽量，和是用含糖量。而性生活最多用汽量或用含糖量，般來說則是燃氣工業熱水蒸汽鍋爐額定的揮發量的80%以上，只要是最比較好的。不夠，有很多很多方便的影向，會影向到燃氣工業熱水蒸汽鍋爐的啟動載荷，假如途徑損失率、燃氣工業熱水蒸汽鍋爐污垢等。
In the case of the same evaporation capacity of the nameplate, the water supply temperature of the steam boiler is 20, 60, 90, 100 and 105, and the temperature of the water supply is different, and the evaporation capacity of the boiler is also very different. Therefore, this aspect should also be taken into consideration and should not be neglected.
蒸汽發生器生物質鍋爐風機在標貼蒸餾量一樣的事情下，其給水工作熱度有20℃、60℃、90℃、100℃及105℃之分，給水工作熱度其他，則生物質鍋爐風機的蒸餾量也有著更大的一定的差異。故，這單領域還要考量到，沒有被刪掉。
Rated steam pressure of the steam boiler marked on the nameplate, should be better than the resistance and the production of steam supply pipe required working pressure for large sum. And we can not ignore the existence of the pipe resistance, this is because the rated steam pressure is higher, then the saturated steam temperature is relatively high, so that it will have an impact on the pipe resistance.
液體燃氣鍋爐標牌上所標出的功率容量液體的有壓力降，可能要比供汽線路有壓力降差及研發所用運轉的有壓力降的加總大才行。以及，自己就說能輕視了線路有壓力降差的具有，這是因此功率容量液體的有壓力降較高搞笑的話，但是其達到飽和狀態液體熱度也是相對比較高的，這樣的還會對線路有壓力降差制造影向。
容果工業燃氣鍋爐遇熱大小大來說，特別其汽耗率是比較大且超用電負荷能力素質強，不然則是反。不僅而且，在存儲空間同一的問題下，遇熱大小大來說，特別其廚房排煙室內溫度相較要低那些，但工業燃氣鍋爐吸收率則要高。
If the heating area of the boiler is large, then its output is relatively large and its overload capacity is strong. Otherwise, it is the opposite. In addition, in the same capacity, the heating area is large, then the exhaust temperature is relatively low, but the boiler efficiency is higher.
