Comprehensive inspection shall include at least the following items:
周到全面檢查不低于有下述建設項目：
1., pot inspection: drum internal parts installation is correct, is there any tools or debris left in the furnace?. The manhole and hand hole can be closed before checking.
1.
6噸熱水器蒸汽鍋爐鍋內審核：鍋筒內部件組裝要不要正確，要不要有APP或堆物滯留在爐內。經審核填寫之后才可封閉人孔、手孔。
2., outside the examination: the main inspection furnace, flue internal accumulation or blockage, the furnace internal wall is intact, whether there are cracks, convex brick, fall off phenomenon.
2.鍋外排查：核心排查爐膛、煙管外部是不是也有累積物或堵賽，爐膛內墻是不是也原樣，沒有裂紋、凸磚、滑落跡象。
3. fire grate inspection: check the necessary gap between the movable part of the grate and the fixed part, and check whether the handle of the movable grate is free or not, whether it can reach the required position or not.
3.爐排觀察：主要的觀察爐排過程組織環節與調整環節之中的相應孔徑，觀察過程組織爐排的扳動手動腳柄推拉是否有自如友家，到底能不能符合明文規定區域。
4. fan inspection: to fan inspection, first hand plate, dynamic coupling or drive V-belt, inspection, inspection, movement, static two parts, whether there is friction, collision, stuck and other anomalies. Fan inlet control board switch should be flexible and tight.
4.送通風機電機檢驗：對送通風機電機檢驗，先用手掌盤動軸承座或鏈傳動半圓帶，檢驗檢驗動、靜二部件是否摩擦力、相碰、卡住等異常現象發生情況發生。送通風機電機通道口調整板打開應具備靈活性高嚴實。
5. other checks:
5.其它體檢：
Check all piping and valves in Sheung Shui system (including water treatment, boiler feed pump).
檢查報告沖水設備(也包括水工作、電爐給水排水泵)那些的排水管道、高壓閥門。
Check all piping and valves in the blowdown system.
排查排污口系統性很多的給水管、調節閥 。
Check all piping and valves in the blowdown system.
查驗供汽整體每個的途徑、球閥及保熱層。
Check the dust seal of the dust collector.
